USD
EUR
GBP
CAD
AUD
HKD
JPY
SGD
NZD
MYR
THB
繁體中文
日本語
English
By SvicloudTV BOX | 07 June 2024 | 0 Comments
How to Set the SviCloud TV Box Remote Control Learning Function?
Setting up the remote control learning function on the SviCloud TV Box allows you to program the TV box remote to control other devices such as your TV. Here are the steps to set up this function:
Enter Learning Mode:
Press and hold the “SET” button on the SviCloud TV Box remote until the LED indicator lights up and stays on. This indicates that the remote is in learning mode.
Select the Button to Program:
Press the button on the SviCloud TV Box remote that you want to program (e.g., the "Power" button). The LED indicator will flash slowly, indicating it’s ready to learn.
Activate the Device Remote:
Place the SviCloud TV Box remote and the device remote (e.g., your TV remote) facing each other, about 1-2 inches apart. Press and hold the corresponding button on the device remote (e.g., the "Power" button) until the LED indicator on the SviCloud remote flashes quickly and then stays on. This means the signal has been learned.
Confirm and Exit Learning Mode:
Press the “OK” button again to confirm and exit the learning mode. The LED indicator should turn off.
Test the Learned Function:
Test the programmed button on the SviCloud TV Box remote to ensure it controls the device as expected. Repeat these steps for any other buttons you want to program. If the remote does not learn the signal correctly, try the process again, ensuring the remotes are properly aligned and close enough to each other.
Enter Learning Mode:
Press and hold the “SET” button on the SviCloud TV Box remote until the LED indicator lights up and stays on. This indicates that the remote is in learning mode.
Select the Button to Program:
Press the button on the SviCloud TV Box remote that you want to program (e.g., the "Power" button). The LED indicator will flash slowly, indicating it’s ready to learn.
Activate the Device Remote:
Place the SviCloud TV Box remote and the device remote (e.g., your TV remote) facing each other, about 1-2 inches apart. Press and hold the corresponding button on the device remote (e.g., the "Power" button) until the LED indicator on the SviCloud remote flashes quickly and then stays on. This means the signal has been learned.
Confirm and Exit Learning Mode:
Press the “OK” button again to confirm and exit the learning mode. The LED indicator should turn off.
Test the Learned Function:
Test the programmed button on the SviCloud TV Box remote to ensure it controls the device as expected. Repeat these steps for any other buttons you want to program. If the remote does not learn the signal correctly, try the process again, ensuring the remotes are properly aligned and close enough to each other.
